Festool TSC 55 XL-FS cordless track saw

SKU: 772-1561702

Availability: Out of stock

CAD $1,165.00 EA
Product shipped by carrier. A customer service representative will contact you to confirm the shipping. See our Shipping Policy for details.



The TSC 55 XL-FS is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Capable of cutting material that is 2 1/8" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work.


Features & benefits :

  • The TSC 55 XL-FS is our most powerful plunge cut saw, providing enough power to slice through the toughest of materials with little concern for swirl or burn marks.
  • At 2 1/8" inch depth of cut, the TSC 55 XL-FS can power through thick stock with ease.
  • The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
  • When used with Festool guide rails, you have ultimate control over the TS saw for perfectly straight cuts. Add the replaceable splinterguard, and a splinter-free cut is achievable on both sides of the blade.
  • The TSC 55 XL-FS makes the actual cut right on the edge of the scribe line, even on bevel cuts.
  • Spring-loaded riving knife (splitter) retracts into the housing during plunge cuts. The riving knife keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback, leaving you in control of the operation.
  • Variable speed allows you to match the speed of the saw to the material. The electronics also maintain a consistent speed under load, improving cut performance and protecting the saw’s motor from thermal and current overload.
  • Blade changes are easier and safer using the FastFix system. When engaged, the power switch and arbor are locked simultaneously. The saw is also locked into a position to facilitate easy arbor bolt removal.


Includes :

  • Track saw TSC 55 XL-FS
  • Fine saw blade 48-tooth
  •  55" (1400 mm) guide rail
  • Limit stop
  • Plug-It power cord
  • Splinterguard
  • SYS 5 T-LOC Systainer case


Specifications :

  • Battery Voltage : 18 V (36 V maximum) / 5,2 Ah
  • Saw blade speed with 18 V battery : 3650 à 3800 RPM
  • Saw blade speed with 36 V battery (2 x 18 V) : 2650 à 5200 RPM
  • Saw blade diameter : 6 1/4" (160 mm)
  • Bevel cuts : 0° à 45°
  • Cutting depth on guide rail : up to 1 15/16" (50 mm)
  • Cutting depth without guide rail : up to 2 1/8" (55 mm)
  • Cutting depth at 45° : 1 7/16" (37 mm)
  • Dust extraction connection diameter : 27 mm et 36 mm
  • Weight : 10.1 lb (4.6 kg) (with 1 battery)