Titebond melamine wood glue bonds porous materials to melamine, vinyl and high-pressure laminates. Ideal for wood, particleboard and MDF. Must be under clamp for a minimum of 30 minutes.
Available in 473 ml (16 oz).
For interior use only.
- Strong initial tack
- Longer open time
- Easily spread with roller or brush
- Water cleanup & non-toxic
Surfaces must be clean and dry. Joints should fit thightly. Apply a heavy spread of glue to surface and clamp for a minimum of 30 minutes. Do not stress joints for 24 hours. Remove excess wet glue with clean, damp cloth. Replace cap after use.
Clamp time dependent on environmental conditions. Not recommanded for exterior use oro where moisture il likely. Not for structural or load bearing applications. Use when temperature, glue and materials are above 7ºC (40 ºF). Store at room temperature. Keep from freezing.