Scie à cloche pour base 4" x 4"
A great all around hole saw to have in your tool belt.
Use this 1 1/4” (32mm) diameter hole saw and arbor to prepare the ends of 4x4 posts for use with our Titan post anchor. Depth of cut is 1 7/8”. Also use this arbor with hole saws as large as 1 3/4" and as small as 3/4" diameter.
You can use our 4"x4" center guide to quickly and easily locate the center of your 4x4 and plunge the hole saw to a depth of 1 7/8”. Use the circular hole cut as a pilot guide for the anchor tube which is 3,5” long. Drive the tube and base flush to post with a 3 lbs mallet.