Titebond original glue (interior)

Titebond original glue is ideal for furniture, cabinetry and finish and trim applications. It is specifically designed for hard and soft woods, as well as most other porous materials. Titebond original glue is ideal for interior woodworking. Must be under clamp for 30 minutes.

 Interior use only.

Available in 237 ml (8 oz), 473 ml (16 oz), 946 ml (32 oz), 3,78 L (1 gallon) and 18,9 L (5 gallons).

Specifications

• Heat-resistant
• Sands easily
• Strong initial tack
• Unaffected by finishes
• Paintable

Directions

Surfaces must be clean and dry. Joints should fit thightly. Apply a heavy spread of glue to surface and clamp for 30 minutes. Do not stress joints for 24 hours. Remove excess wet glue with clean, damp cloth. Replace cap after use.

User tips

Clamp time dependent on environmental conditions. Not recommended for exterior use or where moisture is likely. Not for structural or load bearing applications. Use when temperature, glue and materials are above 10ºC (50 ºF). Sand glued area thoroughly berfore staining. Store at room temperature. Store at room temperature. Keep from freezing.