Titebond II Extend wood glue is ideal for complex assemblies. Provides a longer working time. Excellent water-resistance, water clean-up & non-toxic. Bonds wood, particleboard, MDF, plywood and other porous substrates. Must be under clamp for 30 minutes.
Available in 473 ml (16 oz), 3,78 L (1 gallon).
- Passes Type II water-resistance for exterior applications
- Unaffected by finishes
- Translucent glue line
- Excellent sandability
- High heat resistance
- Easily spread with roller or brush
- Hot press & R-F compatible
Surfaces must be clean and dry. Joints should fit thightly. Apply a heavy spread of glue to surface and clamp for 30 minutes. Do not stress joints for 24 hours. Remove excess wet glue with clean, damp cloth. Replace cap after use.
Stir glue before use to ensure uniformity. Clamp time dependent on fit and environmental conditions. Not for continuous submersion of use below waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 15ºC (60 ºF). Store at room temperature. Keep from freezing.