Titebond moulding wood glue is the thickest, fastest-drying glue available for use with porous and semi-porous materials. It is ideal for finish trim, crown molding, baseboards, window casings and other applications requiring a professional-strength, no-run wood glue. Must be under clamp for 30 minutes.
Available in 473 ml (16 oz).
For interior use only.
- Strong initial tack
- Dries clear
- Excellent sandability
- Unaffected by finishes
Surfaces must be clean and dry. Joints should fit thightly. Apply a heavy spread of glue to surface and clamp for 30 minutes. Do not stress joints for 24 hours. Remove excess wet glue with clean, damp cloth. Replace cap after use.
Clamp time dependent on fit and environmental conditions. Not for structural or load bearing applications. Not recommanded for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 10ºC (50 ºF). Sand glue thoroughly before staining. Store at room temperature. Keep from freezing.