CAMO Edge Deck Screws – Protech Coated
CAMO Edge Deck Screws – Protech Coated
- IDEAL FOR GIVING AN ELEGANT LOOK WITHOUT VISIBLE SCREW
-
EASY TO INSTALL SPECIFICALLY
-
DESIGNED FOR CAMO SCREW GUIDES FOR USE WITH CAMO TIPS
CAMO screws and bits are designed specifically for CAMO screw guides which allow you to obtain a wooden terrace without visible screws. With their thin heads, the screws are practically invisible. CAMO tips are available in two formats.
The Camo #15 Torx Drive Power Bits is designed for standard boards while the CAMO #15 Grooved Board Torx Drive Power Bits is designed for grooved boards on the sides.
The use of tools, fasteners or bits from another brand will affect performance and will not give the desired results.
CAMO screws are available in 2 3/8" long for boards varying from 1" to 1 1/2" thickness.
Allow about 3.5 screws per square foot of surface and/or 1.75 screws per linear foot (based on the installation of 6" wide plank)
Example :
|
Surface dimension |
Screws |
Bit |
|
|
Square feet |
Linéar feet |
Quantities |
|
|
50 sq. ft. |
100 Lf |
200 |
Included |
|
200 sq. ft. |
400 Lf |
700 |
2 Included |
|
500 sq. ft. |
1000 Lf |
1750 |
2 Included |
Ideal for building a superb wooden plank terrace without any visible screws and giving an elegant look to your terrace. Also used for vertical surface construction such as privacy screens and fences. No pre-drilling required and the screws are virtually invisible.
Thanks to the screw guide, the CAMO screws will be hidden in the field, on the side of the board. The screw guides allow you to install 1 screw on each side of the board with a 45 degree angle while automatically ensuring a 1/16" space between the boards.
The Camo Marksman Pro X1 is designed for 5 1/4" to 5 3/4" wide boards
The Camo Marksman Pro NB is designed for narrow planks from 3 1/4" to 5" wide.
The Camo Marksman EDGE is a complementary tool allowing to install the starting boards along the walls without visible screws.CAMO screws and CAMO screw guides can be used on most terrace woods such as Treated lumber, Red Cedar, and exotic woods ad IPE and Garapa. For the installation of exotic woods, the use of an impact drill is recommended.
