Titebond-II Premium wood glue (interior-exterior)

Titebond II Premium wood glue is a one-part wood glue that passes the ANSI Type II water-resistance specification. Designed specifically for both interior and exterior woodworking projects. Must be under clamp for 30 minutes.

It's the ideal adhesive for all outdoor projects : outdoor furniture, birdhouses and planters, and is FDA approved for indirect food contact (cutting boards).

Available in 237 ml (8 oz), 946 ml (32 oz), 3,78 L (1 gallon) and 18,9 L (5 gallons).

For interior and exterior use.

Specifications

• Resists solvents, heat and mildew
• Sands easily
• Passes ANSI/HPVA Type II water-resistance
• Water cleanup and non-toxic
• Ideal for radio frequency (R-F) gluing systems
• Bonds stronger than wood

Directions

Surfaces must be clean and dry. Joints should fit thightly. Apply a heavy spread of glue to surface and clamp for 30 minutes. Do not stress joints for 24 hours. Remove excess wet glue with clean, damp cloth. Replace cap after use.

User tips

Clamp time dependent on environmental conditions. Not for continuous submersion of for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 13ºC (55 ºF). Sand glued area thoroughly berfore staining. Store at room temperature. Keep from freezing.