Zebrawood sequence matched veneer 4,5’’ to 7,5’’ x 12’’ (3 sq.ft.)

In stock : 27
Parcel shipping
Parcel shipped within 1-2 business days
In-store pick-up
Free pick-up, ready between 24 to 48 working hours.
Truck delivery
Delivered by truck in 3 to 10 days

Zebrawood sequence matched veneer 4,5’’ to 7,5’’ x 12’’ (3 sq.ft.)

Unbacked, high-quality, real wood veneer

  • Sheet measures 12" in length and 4-1/2" to 7-1/2" in width. Average thickness is ,024 inches
  • The convenient 3 square foot packs are the perfect size for marquetry, inlay repair, accents on furniture and any other small jobs around the shop.
  • Grain runs lengthwise

Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project.

Wood is a product of nature, and as such, no two pieces are alike to start with, while the same

  • Sequencing: When sheets of veneer are cut from the log in succession and kept together in order. Allows sheets to be arranged to create stunning symmetrical patterns.
  • Faces: Typically, one side of the veneer will be smoother than the other. Whenever possible, glue with the the rougher side down.
  • Substrate: The surface – for large surfaces, often a dimensionally stable material such as plywood, MDF or particleboard – to which veneer is glued.
  • Cutting: A sharp utility knife works, or a special veneer saw can be used. A straightedge also will come in handy.
  • Glue: Regular yellow wood glue works well, but hide glue also could be used. When gluing sheets of veneer next to each other for a large panel, use veneer tape to keep the edges together.
  • Smoothing: Use a roller or a veneer smoothing blade to make sure you have tight adhesion between the veneer and the substrate
More Information
Type of veneerVeneer
Cookies Preference